What are the technical standards for cabinet furniture decorative strips?

The basic components of cabinet furniture include: panel, top plate (floor), partition (two types of activities, fixed), front frame, rear frame, side panel or side frame (including core frame, glass frame), door (glass) Doors, solid wood doors, curved wood doors), drawers (hollowed, solid, fiberboard), decorative strips (front, side), connecting wood (including triangular wood) dustproof board, hardware.

Decorative strip

1. The decorative strips are generally grouped on the front and side of the frame. Usually, the glue is connected to the front frame and the side plate by straight nails or fast teeth.

2, the front and side lines of the decorative strip are generally divided into 45 degrees of seams and two joints, the linear and linear parts must be rubbed to prevent whitening after shrinkage.

3. Decorative strips are generally divided into lower line, lower foot upper line and lower foot lower line. According to the actual requirements, the middle of the cabinet is decorated with a decorative strip as the waist line.

Related reading: What are the manufacturing standards for connecting wood and dustproof panels in cabinet furniture?

4, 45 degree seam parts should be done when the fine cut is done.

5. All trim strips must be flat and smooth when assembled, and no gaps are allowed at the joints.

6, the sole frame must be placed in the middle of the frame, and the control is consistent, the error is allowed to be plus or minus 1/16.

7. The strips on the front side of the cabinet and the side trims must be straight and ensure that the horizontal error is not more than 1/16.

8. The flat strips of the trim strips must be able to completely cover the section of the side trim strips.

9. The flat strips of the trim strips must completely cover the side trim strips with a protrusion error of 0-1/32.

10. The top and bottom crowns of the bookcase and audio cabinet used in the compartment must be on the same line at the top line.

BBQ Mesh

Barbecue wire grill grate is made of high quality 304 stainless steel, never rusting and durable. BBQ Wire mesh does not have any coating or chemical ingredients, making food safer.
Multi-functional Grill Cooking Grid Grate: This wire mesh is mainly used for BBQ Grill Mat for outdoor cooking, it can also be used as a cooling and baking rack. Or you can develop other uses for it.

BBQ mesh,grill mesh,Wire bbq Grill Mesh,Stainless Steel bbq Grill Mesh,steel wire bbq mesh

Shenzhen Lanejoy Technology Co.,LTD , https://www.szstainlesssteelwiremesh.com