Nowadays, there is a lot of attention to the installation of living room lamps. Now there are two kinds of common track spotlights commonly used in the market, namely halogen lamps and metal halide lamps, but no matter what kind of lighting is installed, the method is the same. Next, I will introduce you to how to connect the track light track . And what about the track lamp installation method and wiring?
First, how to connect the track light track
1. It is quite troublesome to install the track lights. If the ceiling of your home room is made of gypsum board, we can use the aircraft bulge to fix it. Some rooms need to punch the lower ribs (pass wire). After fixing, fix it. After the slide, use the slide light to flatten the chuck of the slide light base.
2. When we open the track package and remove the wiring cover, we can touch the longer and better power cable at the wiring for us to install.
3. When we install the track, if it is a roof, we can directly select the wood. If it is an iron keel, we can directly nail the nails, so that the slides can be directly connected.
4. We must align the groove of the slideway, and use a little force in the slideway of the slideway, so that it can be fitted. In addition, we unscrew the handle of the rotation of the chuck, and screw it to a fixed position. .
Second, track lamp installation method and wiring
1, preparation work
When we install the track lights, we first disconnect the power supply of the living room. We must ensure that the power is turned off. Generally, the spotlights are installed with lamps, power cables, and test fixtures. We must install the lamps before installing them. Check all the parts and tools.
2, install the transformer
When installing the spotlights, we must first install the transformer, or buy a spotlight with a transformer, so that it can better avoid the explosion of the spotlight, which will be safer and more secure in later use.
3, install lamps, light stand
When we install the spotlights, we must mark the height position of the spotlights. In addition, we must install the lights and fix the track, put on the hoops or bolts, install the lamp head on the lamp holder and adjust the illumination of the spotlights. Angle and direction, the direction of each spotlight and fixture is consistent and neatly arranged.
4, inspection, testing
When all of our spotlights are installed, we can energize the spotlights. We turn on the switch to see if the fixtures are working properly. If we can work normally, we can adjust the illumination angle of the spotlights.
The above is about the connection of the track light track, I hope to be helpful to everyone! Qi installed network, China's well-known large-scale decoration platform, decoration leading brand. If you want to make a new design, you are advised to apply for the free design service of the net , and help you plan a reasonable space layout and exquisite design through the professional designer's on-site measurement room.
>>Click here to get professional designer free room design
Disclaimer: We have used all means to find the source of the picture or content. We have not found the relevant right holder. Please ignore the negligence. If the relevant rights holders see it, please contact us in time. We will delete and proceed as soon as possible. Handle it properly.
Food Container Glass,Glass Storage Containers,Food Storage Jars,Glass Candy Jars
Xi'an ATO International Co., Ltd , https://www.xianato.com