It’s been quite some time since my last update here, but I’ve been juggling several exciting projects lately, including launching this brand-new website and blog platform. However, that’s no excuse—I’ve also been diligently progressing on this ambitious project!
Back in my previous post, I began breaking down the materials for the cabinetry and getting everything prepared for assembly. Once the basic structure of the cabinets was put together, I milled some pine boards to create shiplap backs for the cases. These panels simply slide into grooves at the back of the cabinets without any glue. I also attached the trim to the front of the cabinets using a mix of glue and finish nails.
After securing the shiplap backs in place, I clamped all the cabinets together to get a feel for how the final piece would look. One key consideration throughout this build is that the entire unit needs to be easily disassembled into its three main parts—so there’s no permanent gluing involved.
With a clearer vision of what the completed cabinet would look like, I turned my attention to the two sliding barn doors that will serve as the front. With the cabinet temporarily assembled, I could take precise measurements and start building the doors. They’re straightforward to make—they’re just solid pine—but the trickiest part is ensuring the angles on the crossbeams align perfectly. I managed to find some old, rusty nails that I think add a nice rustic touch to the doors.
The next step will be hanging the doors properly to make sure everything lines up correctly and functions smoothly. After that, I’ll install the final trim molding across the top and bottom. Once all that’s done, it’ll be time to move onto the finishing touches. For this project, I won’t be handling the finishing myself, but the cabinets will be painted with milk paint, while the doors will receive a clear finish.
I’ve included some photos along the way to document the progress. The first photo shows the initial assembly of the cabinet structure. The second image captures the shiplap backs being installed, giving you an idea of how the back panels fit into the grooves. The third picture highlights the rustic charm of the sliding barn doors with those old nails adding character.
As always, I’m excited about how this project is coming along. It’s been a lot of work, but seeing the pieces come together makes it all worthwhile. Stay tuned for the next steps—I’m confident it’s going to turn out beautifully!
Fowl Catcher,Stainless Steel Fowl Catcher,Steel Chicken Catcher,Catcher Stainless Steel
Hebei Liebang Metal Products Co.,Ltd , https://www.lb-animaltraps.com