FBM201d, FBM201d,

For details, please visit my store home page http://xrd0196.pack.cn

Technical parameters Model 3RW30 1. ~ 3RW30 2. 3RW30 3. ~ 3RW30 4.
Control Electronics Ratings Rated Control Voltage • Operating Range Rated Control Current • Standby • During Pull-In • Switched-Rated Rated Frequency • Operating Range Terminals
A1/A2 V
%
mA
mA
mA
Hz
%
twenty four
±20
< 50
< 100
< 100
50/60
±10
110 ~ 230
-15/+10
6
15
15
twenty four
±20
20
< 4000
20
110 ~ 230
-15/+10
< 50
< 500
< 50
Control input
IN
Power consumption • 24 V DC
• 110/230 V AC
mA
mA
ON/OFF
About 12
AC: 3/6; DC: 1.5/3
Relay output 1
Rated operating current over-voltage protection short circuit protection
ON 13/14
A
A
Work instructions (NO)
3 AC ~ 15/AC ~ 14,230 V
1 DC ~ 13,24 V protection contacts via varistors
4 A gL/gG;
6 A fast blow (fuse not included in delivery)
Work indicator off start bypass
led
Device Green Green Green Status/Bypass/Fault Off Green Flashing Green Device Green Green Green Status/Bypass/Failure Off Green Flashing Green Fault Signal • 24 V DC: U <0.75 x Us or U > 1.25 x Us
• 110 to 230 V AC: U <0.75 x Us or U> 1.15 x Us
Electrical overload at bypass (reset by removing IN command)
Missing supply voltage, phase failure, missing load Device failure Off Off Yellow Green Red Red Red Red Red Red Off Off -
Green Red Red Red -
Red Red Model 3RW30 1. ~ 3RW30 4.
Factory default value control time and parameter control time closure time (control voltage connected)
Closing time (automatic/main contactor mode)
Ms
Ms
< 50
< 300
Power Failure Bridge Time Control Supply Voltage ms 50
Power failure response time 1)
Load circuit ms 500
Start parameter Start time Start voltage
s
%
0 ~ 20
40 ~ 100
7.5
40
Start detection x
Operating mode output 13/14
Rising edge Falling edge Start command Stop command
ON
1) *Main: World-famous brand PLC, DCS system spare parts module〗 〖1.〗 Allen-Bradley (USA AB) series products"
〖2.〗 Schneider (Schneider Electric Series)
〖3. General electric series products』
〖4.〗 Westinghouse (United States Westinghouse series products)
〖5.〗 SIEMENS (Siemens series products)
〖6.〗 Sales of ABB Robots. FANUC Robots, YASKAWA Robots, KUKA Robots, Mitsubishi Robots, OTC Robots, Panasonic Robots, MOTOMAN Robots.
〖7.〗 estinghouse (Westinghouse): OVATION system, WDPF system, MAX1000 system spare parts.
〖8. Invensys Foxboro: I/A Series system, FBM (field input/output module) sequential control, ladder logic control, accident recall processing, digital-analog conversion, input/output signal processing, data communication, and processing Wait. Invensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture.
〖9.〗 Siemens (Siemens): Siemens MOORE, Siemens Simatic C1, Siemens CNC system and so on.
〖10.〗 Bosch Rexroth (Bosch Rexroth): Indramat, I/O module, PLC controller, drive module, etc.
〖11.〗 Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.

1. The Standard of Stainless Steel material.

American: 201, 202, 410, 420, 430, 304, 316.

Japan: SUS201, SUS202, SUS410, SUS420, SUS430, SUS304, SUS316.

German: 13/0, 18/0, 18/8, 18/10.

18/0=430, 18/8=304, 18/10=316

 

2. What`s the difference from 18/0,18/8,18/10?

For 18/8, it means the material have 16%~18%, the number 18 means chrome 18%, and number 8 means nickle has 8%.

For 18/0, it also means chrome 16%~18%, but the nickle is zero, because the nickle is very expensive, 18/8 is much more expensive than 18/0.

For 18/10, it means chrome 16%~18%, but nickle is 10%.

Actually, the material 18/8 and 18/10 are the same material, because the tolerance of nickle is 8%~10%.

In china, we select 8% as our standard, but in Europe, people will select higher percentage as their standard. So we call it 18/8 in china and Europe people call it 18/10. 

Cutlery

Golden Spoon Sets,Stainless Steel Spoon,Spoon Fork Knife,4Pcs Stainless Steel Cutlery Sets,Stainless Steel Flatware Sets

Homefelt Houseware co.,ltd , https://www.dghomefelt.com