Water paste standard process

Cut down the photosensitive capillary film flat on the mat with a certain thickness of absorbent paper on the flat work surface, and the photosensitive layer is facing upwards â†’ Press the screen coarse and degreased and dry screen printing surface pressed on the photosensitive layer â†’ Spray with even spray water on the squeegee surface of the screen, and make the photographic film wet to produce capillary action. â†’ Use a soft squeegee to smoothly wipe excess moisture from the squeegee surface â†’ Use clean. The rag removes excess water around the frame â†’ 35-40Â°C to dry completely â†’ peel off the film base â†’ bake back â†’ fully expose â†’ close the net...

Source: China Washing & Dyeing Industry Information Center

The film has excellent heat sealing performance and excellent transparency, is one of the main packaging composite base materials, used in the production of high-temperature boiling film, vacuum aluminum coating film, the market is very optimistic.Moreover, with the development of domestic production equipment, some of the technical indicators have reached the international advanced level.As a result, the threshold to enter the film production is lower and lower.Because of this, some enterprises rush to import the flow of film production line in order to reach the designated position, the higher the level, the better, while leaving the market demand and the return on investment aside, which will cause huge waste of resources.

Adhesive Tape Film

Adhesive Tape Film,Adhesive Tape PE Film,Adhesive Double Tape Film,Sided Adhesive Tape Film

XINLE HUABAO MEDICAL PRODUCTS CO.,LTD. , http://www.huabaomedical.com